[3c509] problem of 3c509b-tcp
Bibliothèque de Toamasina
butoam@dts.bow.mg
Wed, 26 Jul 2000 18:21:00 +0300
Dear Sir, I have just installed
linux " mandrake 6.1 " on a machine marks " Dell OptiPlex Gn " - card
réseaux:3c509b-tpc etherlink III -
card sound: creative ViBRA 16X PnP - board graphics: Matrox
millenium II the installation was
successful as envisaged. During the installation, I chose mode "
AUTOSTROBE " for the detection of
the card network and I profit to configure our network (to give an
address IP to the machine). (e.g:je
did not choose the 2nd mode: " specify " since I do not have least
information on the module than it
requires of me). And all was passed very well and with same from
success since all the other
peripherals works very well. Problème:je cannot have access to the
networks which exists in our park
(Windows machines) whereas the other machines can be
communicated between them.
Ci below the result of:
- / proc/ioports:
- / proc/interrupts:
Here is in short my
problem, I ask you sincèerement
helps me for my problem i.e. to direct me to solve my problem. I am
still initial out of Unix (linux)
and bearing I will want to make a success of my my objective:
" installation of a
server linux for Windows customers"
I count much on your Mister
assistance!!! So long!!!
My address : DODO Sata
Université de Toamasina
Barikadimy - Toamasina
MADAGASCAR
Tél: 261 53 338 75 (bureau)
261 53 312 30 (à la maison)
BP:591
e-mail : butoam@bow.dts.mg
satadodo@caramail.com