eepro100 wows

[Mr. James W. Laferriere]

	Hello Mr Crawford,	Yup,

	ftp://cesdis.gsfc.nasa.gov/pub/linux/drivers/test/eepro100.c

On Wed, 29 Jul 1998 drc@ns1.theeii.net wrote:

> Mr. Becker:
> 
> Hi I just upgraded my system to a P11 300Mhz with the Intel 440BX chipset.
> now the ethernet card that I was using in my old P150 is not working. Here
> is the error message when it hits init()
> 
> eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
> eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
> eth0: Intel EtherExpress Pro 10/100 at 0xef40, 00:A0:C9:5D:7A:5C, IRQ 7.
>   Board assembly 667280-003, Physical connectors present: RJ45
>   Primary interface chip i82555 PHY #1.
> Self test failed, status ffffffff:
>  Failure to initialize the i82557.
>  Verify that the card is a bus-master capable slot.
>   Receiver lock-up workaround activated.
> eth0: Transmit timed out: status 0000 command 0020.
> eth0: Trying to restart the transmitter...
> eth0: Transmit timed out: status 0000 command 0010.
> 
> 
> 
> Can you tell me what to do to fix this problem please.
> 
> Reply to "dcrawford@talleytech.com"
> 
> This site/linuxbox may not have sendmail setup so the above address witll
> work.
 				Hth, JimL
+-----------------------------------------------------------------------+ 
|   James W. Laferriere  -  Network    Engineer  -  babydr@nwrain.net   |
|    System Techniques   -   25416  -  22nd S.   -   Kent, WA  98032    |
|      Give me VMS     -or-    Give me Linux   -but-   only on AXP      |
+-----------------------------------------------------------------------+
|-> Linux-Vax Port, Now in Progress  !YAY! there's Progress To Report <-|
|-> Please See http://ucnet.canberra.edu.au/~mikal/vaxlinux/home.html <-|
|-> Maintainer:   Michael Still mikal@blitzen.canberra.edu.au         <-|
+-----------------------------------------------------------------------+