eepro100 1.0.3 patch

[Tom Eastep]

Hi,

Servui Koubouchine wrote:

> > Use
> >   http://cesdis.gsfc.nasa.gov/linux/drivers/test/eepro100.c

I just downloaded, compiled and installed this version of the eepro100 driver. Upon
installation, I saw the following from dmesg:

TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043d, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043e, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043e, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043b, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043b, len 20/20/40

I've seen complaints about "bad check sum" messages on l-k but this is the first
time that I've seen them on one of my systems. I re-installed the eepro100.c from
linux 2.1.125, rebuilt and reinstalled the eepro100.o module (ifdown eth0, rmmod
eepro100 and ifup eth0) and these message haven't reappeared.

-Tom
--
Tom Eastep
tom.eastep@compaq.com