New version of eepro100-diag.c (ref: IBM 82559 board)

[kellyo@us.ibm.com]

Here's the new output.  We also powered off and unplugged the device (read
info about PnP devices giving this result) and
ran it again, but got the same results.


eepro100-diag.c:v0.08 6/25/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Intel 82557 EtherExpressPro100B adapter at 0xf3eff000.
EEPROM address size probe returns 0xfffffff.
EEPROM contents:
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
  ffff ffff ffff ffff ffff ffff ffff ffff
 The EEPROM checksum (should be 0xbaba) is 0xffc0.
Intel EtherExpress Pro 10/100 EEPROM contents:
  Station address FF:FF:FF:FF:FF:FF.
  Board assembly ffffff-255, Physical connectors present: RJ45 BNC AUI MII
  Primary interface chip i82555 PHY #-1.
    Secondary interface chip i82555, PHY -1.



Kelly O'Brien    -   AT&T Global Network Services
Spectrum 3446    Tampa, Florida
Office: 813-878-3817  (t/l 427)
Lotus Notes ID:    kellyo@IBMUS
Internet:                  kellyo@us.ibm.com
VM:                          kellyo at ibmusm37

===========================================================================
                  "Don't let your knowledge be limited by what you already
know." - me




Donald Becker <becker@cesdis.gsfc.nasa.gov> on 06/25/99 10:58:05 AM

To:   Kelly O'Brien/Tampa/IBM@IBMUS
cc:   linux-eepro100@cesdis.gsfc.nasa.gov
Subject:  New version of eepro100-diag.c (ref: IBM 82559 board)





I've added code to  eepro100-diag.c  so that we may track this problem down.
  ftp://cesdis.gsfc.nasa.gov/pub/linux/diag/eepro100-diag.c
   http://cesdis.gsfc.nasa.gov/linux/diag/index.html

(Actually, I did a major restructuring, udpated it to work better with
2.2.* kernels, etc.)

Please run
  eepro100-diag -ee
and report what the line
     printf("EEPROM address size probe returns %#x.\n", ee_addr_size);
outputs.

On Thu, 24 Jun 1999 kellyo@us.ibm.com wrote:

> Subject: Re: 82559 Intel Chip and linux eepro100 driver
> I tried the new device driver as well and am still getting the following:
> eth0: Invalid EEPROM checksum 0x21f5, check settings before activating this
device!

> > I am getting the following error when using an IBM (actually Intel) 10/100
> > EtherJet PCI Management adapter with the eepro100 linux driver.  Do you know

Donald Becker                        becker@cesdis.gsfc.nasa.gov
USRA-CESDIS, Center of Excellence in Space Data and Information Sciences.
Code 930.5, Goddard Space Flight Center,  Greenbelt, MD.  20771
301-286-0882        http://cesdis.gsfc.nasa.gov/people/becker/whoiam.html