[eepro100] Difficulty getting ping

[Ron Steinke]

	I can get the card to load, but I'm having some sort
of difficulty finding it afterwards. What I try is:

root@yggdrasil~% ifconfig eth0 10.0.0.1 up
root@yggdrasil~% ifconfig eth0 
eth0      Link encap:Ethernet  HWaddr 00:03:47:1B:D6:F9  
          inet addr:10.0.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          Interrupt:11 Base address:0x2000 

root@yggdrasil~% ping -c 50 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
ping: sendto: Network is unreachable
ping: wrote 10.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 10.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 10.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 10.0.0.1 64 chars, ret=-1
							/* Ctrl-C here */
--- 10.0.0.1 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss

Is this a card problem, or some sort of network problem?
						Ron Steinke