[eepro100] Forcing 100Mb Full Duplex on (2) Intel OEM i82557/ i82558.

[Cagle, John]

The 380 isn't a replacement for the 360, it's a different server.  The
ProLiant "DL" server lineup is as follows:

DL320 - 1P, 1U, 2 drives, 2GB RAM, 1 PCI slot
DL360 - 2P, 1U, 2 drives, 4GB RAM, 2 PCI slots
DL380 - 2P, 3U, 4 drives, 4GB RAM, 4 PCI slots
DL580 - 4P, 4U, 4 drives, 16GB RAM, 6 PCI slots

All the ProLiant servers are summarized here:

	http://www.compaq.com/products/servers/platforms/index.html

By the way, I'd like to wish everyone a prosperous new year!  (or is it a
new millennium? ;-)

Regards,
John

> -----Original Message-----
> From: Graham Wooden [mailto:GWooden@interland.com]
> Sent: Friday, December 29, 2000 11:11 AM
> To: 'becker@scyld.com'
> Cc: 'eepro100@scyld.com'
> Subject: RE: [eepro100] Forcing 100Mb Full Duplex on (2) Intel OEM
> i82557/ i82558.
> 
> 
> Nope.. DL380. I am not sure if they are the replacements of 
> DL380 though.
> Dual PIII 733's...
> Anyways, thanks for spearing me on the lecture, I have seen 
> it a few times
> ;-)
> 
> That worked great!
> 
> You da man!
> 
> 
> Graham Wooden, R.H.C.E.
> Systems Engineer
> 678.365.2849 | gwooden@interland.com
> Interland, Inc.  | www.interland.com
> 
> 
> -----Original Message-----
> From: Donald Becker [mailto:becker@scyld.com]
> Sent: Friday, December 29, 2000 11:53 AM
> To: Graham Wooden
> Cc: 'eepro100@scyld.com'
> Subject: Re: [eepro100] Forcing 100Mb Full Duplex on (2) Intel OEM
> i82557/i82558.
> 
> 
> On Fri, 29 Dec 2000, Graham Wooden wrote:
> 
> > RedHat 6.2 w/ 2.2.16-3 kernel.
> > Compaq DL380, with onboard Intel 100 and PCI Intel 100.
> 
> DL380?  Do you mean DL360?  Or are our DL360 systems already obsolete?
> 
> > Donald Becker's eepro100 driver, v1.11. Loaded as a module.
> ...
> > I am trying to get both of these cards, forced to full 
> duplex 100 megabit.
> > When loading as a module, only eth0 is being forced 
> correctly, not eth1.
> ...
> > Here is what my /etc/conf.modules has:
> > alias eth0 eepro100
> > options eepro100 debug=3 options=0x30
> > alias eth1 eepro100
> > options eepro100 debug=3 options=0x30
> 
> Easy.  You passed the same _single_ option.  Instead do
>  options eepro100 debug=3 options=0x30,0x30
> 
> This is shown in the example at
>    http://www.scyld.com/network/eepro100.html
> 
> > options '0x30' is 100Mb with Full Duplex, right?  
> > I even tried to pass full_duplex=1 in the same line, no go.
> 
>   full_duplex=1,1
> 
> > Only eth0 is getting full duplex.
> > I really need both to full duplex, 100Mb on both cards.
> 
> Now, you know that I should give you the "never force full duplex"
> lecture...
> 
> 
> Donald Becker				becker@scyld.com
> Scyld Computing Corporation		http://www.scyld.com
> 410 Severn Ave. Suite 210		Second Generation 
> Beowulf Clusters
> Annapolis MD 21403			410-990-9993
> 
> _______________________________________________
> eepro100 mailing list
> eepro100@scyld.com
> http://www.scyld.com/mailman/listinfo/eepro100
>