[eepro100] (problems!!) EtherExpress PRO/100 Mobile 32 bit cardbus --

[Donald Becker]

On Thu, 20 Jul 2000, Jon Oringer wrote:
> Subject: [eepro100] (problems!!) EtherExpress PRO/100 Mobile 32 bit cardbus --
> 
> I just installed Redhat 6.2 -- Im having problems getting the eepro100 32
> bit
> PCMCIA cardbus to work..
> 
> any network activity after ifup eth0 causes the following message
> "eth0": 21140 transmit timed out, status ...
> eth0: Tx hung, 15 vs. 9

This is the Tulip driver, not the eepro100 driver.
The Intel "version II" card is based on the i82559 and uses the
eepro100  driver.   (Yes, it's confusing.)

You should post this to the tulip list.  See
   http://www.scyld.com/network/tulip.html

You should include the actual status, since the report above is almost
useless.  The 'tulip-diag -af' output would also be useful, and may just
directly tell you the problem.  (IRQ blocked, bus parity error, etc.)

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Beowulf Clusters / Linux Installations
Annapolis MD 21403