[eepro100] Re: eepro100 problems

[dschmitz@pp1.usuhs.mil]

The whole system just stops responding, keyboard and all.  This only
happens with the Intel EtherExpress Pro100 cards in though, it does not
happen when I just have a 3com 509b card or without any network cards.
Also, this does not happen with another PC164 system I'm running on an ARC
console, booting with MILO.  This problem occurs with the SRM console
booting with aboot.

On Wed, 26 Jul 2000, Andrey Savochkin wrote:

> Hello,
> 
> On Tue, Jul 25, 2000 at 12:50:43PM -0400, dschmitz@pp1.usuhs.mil wrote:
> > I am running a PC164 DEC Alpha with an SRM console and kernel 2.4
> > test5-pre3.  When I boot the system with an Intel EtherExpress Pro100
> > card, the system locks after about a minute or so.  When I boot the system
> 
> That's strange.
> Could you elaborate about the lockup?
> Does the whole system hangs or just network?
> 
> > without any network cards, it boots fine and doesn't lock.  The network
> > driver version I am using is included in the kernel, Revision 1.33
> > 2000/05/24 by Andrey V. Savochkkin.  I have tried to compile the 1.10a
> 
> Best regards
> 					Andrey V.
> 					Savochkin
> 
> _______________________________________________
> eepro100 mailing list
> eepro100@scyld.com
> http://www.scyld.com/mailman/listinfo/eepro100
>