[eepro100] suspend problem with eepro100, intel 82557

[Jan Just Keijser]

Hi Alain,

looks like the transceiver type of your card is not detected properly (or is not
recognized at all); can you please post the output of
  eepro100-diag -D -f -aa
(debug output) - hopefully one of the eepro100 developers can then tell if/when
this card will be supported.

This is definitely out of my league...

HTH,

JJK

Alain E. wrote:

> Using eepro100-diag -f -aa
>
> eepro100-diag.c:v2.02 7/19/2000 Donald Becker (becker@scyld.com)
>  http://www.scyld.com/diag/index.html
> Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xdcc0
> i82557 chip registers at 0xdcc0:
>   ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
>   Interrupt sources are pending.
>    The transmit unit state is 'Unknown'.
>    The receive unit state is 'Broken-15'.
>   This status is unusual for an activated interface.
>  The Command register has an unprocessed command ffff(?!).
>
> Using eepro100-diag -f -e
>
> Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xdcc0
> Intel EtherExpress Pro 10/100 EEPROM contents:
>   Station address FF:FF:FF:FF:FF:FF.
>   Board assembly ffffff-255, Physical connectors present: RJ45 BNC AUI MII
>   Primary interface chip i82555 PHY #-1.
>     Secondary interface chip i82555, PHY -1.
>
> Any Idea ?