[eepro100] ZYNX 4-port (21143) fails to autonegotiate correctly. (tulip: 0.9.14, RH
7.1)
Ben Greear
greearb@candelatech.com
Sun, 22 Apr 2001 19:27:44 -0700
My fight with my ZYNX 4-port (ZX346) NIC continues this evening...
I have two machines, one (lf4) has the ZYNX, and two eepro100s, the other
machine (lf1) has 3 eepro100s. Both machines also have a VIA-RHINE on
the motherboard.
The eepro100's run beautifully...but the ZYNX seems pretty damn sorry.
The 4th port of the ZYNX (eth4) is connected to the third eepro (eth3)
on lf1. The ZYNX seems to be claiming that it can do, and has done autonegotiation,
but the eepro sees it as fixed at 100bt.
The end result is JABBER being seen by the eepro, and lots of CARRIER
errors reported by the tulip. I'm dropping around 5% of the packets when
running random packet size at 512Kbps....
Here is some info gathered from the machine running the ZYNX board.
This first part seems to show the error: The tulip thinks it has
completed autonegotiation, and that it is advertising lots of things,
but the eepro does not agree. Information from the other machine is
farther down...
I'll be happy to test any ideas you have for patching this thing up to
work on the 2.4 kernel series. I'm trying right now to get the Alan Cox's
latest kernel patch to compile, which has some tulip updates by Jeff Garzik..
Let me know if there is more information that I can produce to help you...
Thanks,
Ben
[ lf4, the ZYNX/tulip machine running RH 7.1 ]
> mii-diag -v eth4
mii-diag.c:v2.00 4/19/2000 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
MII PHY #32 transceiver registers:
1000 786c 0000 0000 0621 41e1 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000.
Basic mode control register 0x1000: Auto-negotiation enabled.
You have link beat, and everything is working OK.
This transceiver is capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation complete.
Your link partner advertised 41e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
MII PHY #32 transceiver registers:
1000 786c 0000 0000 0621 41e1 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000.
Basic mode control register 0x1000: Auto-negotiation enabled.
Basic mode status register 0x786c ... 786c.
Link status: established.
Capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation complete.
This transceiver has no vendor identification.
I'm advertising 0621: Flow-control 100baseT4 10baseT
Advertising no additional info pages.
IEEE 802.3 CSMA/CD protocol.
Link partner capability is 41e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Negotiation completed.
> ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:50:08:00:74:EB
inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22105 errors:0 dropped:0 overruns:0 frame:0
TX packets:40630 errors:0 dropped:0 overruns:0 carrier:0
collisions:32073 txqueuelen:100
Interrupt:11 Base address:0xe000
eth1 Link encap:Ethernet HWaddr 00:C0:95:E2:4C:0C
inet addr:192.2.2.5 Bcast:192.2.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:702 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:10 Base address:0xd000
eth2 Link encap:Ethernet HWaddr 00:C0:95:E2:4C:0D
inet addr:172.1.2.211 Bcast:172.1.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:702 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:9 Base address:0xd400
eth3 Link encap:Ethernet HWaddr 00:C0:95:E2:4C:0E
inet addr:192.2.2.2 Bcast:192.2.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:702 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:11 Base address:0xd800
eth4 Link encap:Ethernet HWaddr 00:C0:95:E2:4C:0F
inet addr:172.1.2.201 Bcast:172.1.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:56079 errors:0 dropped:0 overruns:0 frame:0
TX packets:56959 errors:7665 dropped:0 overruns:0 carrier:7665
collisions:830 txqueuelen:400
Interrupt:5 Base address:0xdc00
eth5 Link encap:Ethernet HWaddr 00:A0:C9:20:BE:25
inet addr:172.1.1.3 Bcast:172.1.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:5 Base address:0xe800
eth6 Link encap:Ethernet HWaddr 00:A0:C9:20:BE:2D
inet addr:172.1.2.3 Bcast:172.1.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:11 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:366 errors:0 dropped:0 overruns:0 frame:0
TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
> lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine 10/100] (rev 06)
00:12.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:13.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 01)
00:14.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 01)
01:01.0 VGA compatible controller: Trident Microsystems Cyber 9525 (rev 49)
02:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
02:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
02:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
02:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
> dmesg
Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
BIOS-e820: 0000000007f00000 @ 0000000000100000 (usable)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone DMA has max 32 cached pages.
zone(1): 28672 pages.
zone Normal has max 224 cached pages.
zone(2): 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.2-2
Initializing CPU#0
Detected 551.257 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1101.00 BogoMIPS
Memory: 126472k/131072k available (1365k kernel code, 4212k reserved, 92k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb340, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 83893kB/27964kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD102AA, ATA DISK drive
hdc: ATAPI CDROM MS5.00, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 20044080 sectors (10263 MB) w/2048KiB Cache, CHS=19885/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 65984k swap-space (priority -1)
Adding Swap: 196600k swap-space (priority -2)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr 8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x3f0 key=0x87 devid=97 devrev=73 oldid=ff
Winbond chip type 83977TF / SMSC 97w33x/97w34x
Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=00
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=Standard (SPP) and Bidirectional(PS/2)
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (1024 buckets, 8192 max)
via-rhine.c:v1.08b-LK1.1.7 8/9/2000 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 00:14.0
eth0: VIA VT3043 Rhine at 0xe000, 00:50:08:00:74:eb, IRQ 11.
eth0: MII PHY found at address 1, status 0x782d advertising 05e1 Link 0021.
Linux Tulip driver version 0.9.14 (February 20, 2001)
eth1: Digital DS21143 Tulip rev 65 at 0xd000, 00:C0:95:E2:4C:0C, IRQ 10.
eth1: EEPROM default media type Autosense.
eth1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
eth1: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
eth1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
eth1: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
eth2: Digital DS21143 Tulip rev 65 at 0xd400, 00:C0:95:E2:4C:0D, IRQ 9.
eth2: EEPROM default media type Autosense.
eth2: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
eth2: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
eth2: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
eth2: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
eth3: Digital DS21143 Tulip rev 65 at 0xd800, 00:C0:95:E2:4C:0E, IRQ 11.
eth3: EEPROM default media type Autosense.
eth3: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
eth3: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
eth3: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
eth3: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
eth4: Digital DS21143 Tulip rev 65 at 0xdc00, 00:C0:95:E2:4C:0F, IRQ 5.
eth4: EEPROM default media type Autosense.
eth4: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
eth4: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
eth4: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
eth4: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 5 for device 00:13.0
eth5: Intel Corporation 82557 [Ethernet Pro 100], 00:A0:C9:20:BE:25, I/O at 0xe800, IRQ 5.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
PCI: Found IRQ 11 for device 00:14.0
PCI: The same IRQ used for device 00:0b.0
eth6: Intel Corporation 82557 [Ethernet Pro 100] (#2), 00:A0:C9:20:BE:2D, I/O at 0xec00, IRQ 11.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
eth5: 0 multicast blocks dropped.
eth5: 0 multicast blocks dropped.
eth6: 0 multicast blocks dropped.
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Uniform CD-ROM driver unloaded
*****************************************************************************
Information from the machine running the eepro, and kernel 2.2.19 (RH 6.2)
*****************************************************************************
> mii-diag -vv eth3
mii-diag.c:v2.00 4/19/2000 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
MII PHY #1 transceiver registers:
3100 782f 2000 5c00 01e1 01e1 0001 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 8462
8000 0021 0000 1800 a3b9 0079 6305 001d.
Basic mode control register 0x3100: Auto-negotiation enabled.
Basic mode status register 0x782f ... 782f.
Link status: established.
This transceiver is capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation complete.
*** Link Jabber! ***
Your link partner is generating 100baseTx link beat (no autonegotiation).
> ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:50:08:00:35:C6
inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25028 errors:0 dropped:0 overruns:0 frame:0
TX packets:47340 errors:0 dropped:0 overruns:0 carrier:0
collisions:41879 txqueuelen:100
Interrupt:5 Base address:0xd400
eth1 Link encap:Ethernet HWaddr 00:A0:C9:25:48:9D
inet addr:172.1.1.2 Bcast:172.1.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:10
eth2 Link encap:Ethernet HWaddr 00:A0:C9:77:9D:D9
inet addr:172.1.2.2 Bcast:172.1.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:9 Base address:0x2000
eth3 Link encap:Ethernet HWaddr 00:A0:C9:24:DC:47
inet addr:172.1.2.200 Bcast:172.1.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44604 errors:0 dropped:0 overruns:0 frame:6471
TX packets:50686 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
Interrupt:5 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:264 errors:0 dropped:0 overruns:0 frame:0
TX packets:264 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
vlan0005 Link encap:Ethernet HWaddr 00:A0:C9:25:48:9D
inet addr:192.168.5.3 Bcast:192.168.5.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
vlan0006 Link encap:Ethernet HWaddr 00:A0:C9:25:48:9D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:400
> lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine 10/100] (rev 06)
00:12.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 01)
00:13.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 02)
00:14.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 01)
01:00.0 VGA compatible controller: Trident Microsystems Cyber 9525 (rev 49)
> dmesg
Linux version 2.2.19 (root@lf1.myip.org) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 16 08:11:12 MST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 07f00000 @ 00100000 (usable)
Detected 551262 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1101.00 BogoMIPS
Memory: 127676k/131072k available (1236k kernel code, 412k reserved, 1680k data, 68k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb310
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD102AA, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: WDC WD102AA, 9787MB w/2048kB Cache, CHS=1247/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda2 < hda5 hda6 hda7 >
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 265032k swap-space (priority -1)
via-rhine.c:v1.08b-LK1.0.0 12/14/2000 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT3043 Rhine at 0xd400, 00:50:08:00:35:c6, IRQ 5.
eth0: MII PHY found at address 1, status 0x782d advertising 05e1 Link 0021.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
eth1: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:25:48:9D, IRQ 10.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
eth2: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:77:9D:D9, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 678400-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
eth3: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:24:DC:47, IRQ 5.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
vlan_ioctl: cmd: 5200
VLAN REGISTER: Allocated new group, idx: 3
vlan_ioctl: cmd: 5200
vlan: add 01:00:5e:00:00:01 mcast address to master interface
eth1: 0 multicast blocks dropped.
eth2: 0 multicast blocks dropped.
eth3: 0 multicast blocks dropped.
vlan: add 01:00:5e:00:00:01 mcast address to master interface
vlan: add 01:00:5e:00:00:01 mcast address to master interface
--
Ben Greear (greearb@candelatech.com) http://www.candelatech.com
Author of ScryMUD: scry.wanfear.com 4444 (Released under GPL)
http://scry.wanfear.com http://scry.wanfear.com/~greear