[eepro100] eth0: card reports no resources

[Alvin Oga]

hi ya issam

many diff possible answers...
	- easiest way is to use modules for eepro100
	in your kernel

if the above simple way out didnt solve your problem...
than
	- try a latest kernels ... it'd probably have the latest
	drivers ???

	- next option is to download the latest eepro100 driver
	from the net or probably latest linux CDroms

	- swap in a PCI-based NIC card to get online if you 
	need to d/l from the net

have fun
alvin

On Sat, 26 Jan 2002, Issam W. Alameh wrote:

> Hi all, 
> 
> I need your help
> 
> 
> lspci -v is showing
> 
> 00:0d.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
>         Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard
>         Flags: bus master, medium devsel, latency 32, IRQ 10
>         Memory at f7900000 (32-bit, non-prefetchable) [size=4K]
>         I/O ports at d000 [size=64]
>         Memory at f7800000 (32-bit, non-prefetchable) [size=1M]
>         Expansion ROM at <unassigned> [disabled] [size=1M]
>         Capabilities: [dc] Power Management version 2
> 
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
>         Subsystem: Super Micro Computer Inc: Unknown device 2166
>         Flags: bus master, stepping, medium devsel, latency 0
>         Capabilities: [c0] Power Management version 2
> 
> 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]
> )
>         Subsystem: Super Micro Computer Inc: Unknown device 2166
>         Flags: bus master, medium devsel, latency 32
>         I/O ports at d400 [size=16]
>         Capabilities: [c0] Power Management version 2
> 
> 00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 62)
>         Subsystem: VIA Technologies, Inc.: Unknown device 0102
>         Flags: bus master, medium devsel, latency 32, IRQ 11
>         I/O ports at e400 [size=256]
>         Memory at f7901000 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [40] Power Management version 2
> 
> 
> 
> and my machine every when and while is going down with error :  eth0: card reports no resources
> 
> where to get proper instructions on how to install drivers to fix this?? is changing network card will fix??? what is the good one to use???
> 
> 
> Issam
>