[eepro100] eepro100 on SuSE Linux

[Olson, John C]

All the switch ports here are hard-coded for 100/Full.  That's why I'm
trying for that particular setting.

I am running mii-diag as root, and that is what I get.  How do I check / set
CAP_NET_ADMIN capability?

I tried setting options to 0x200 (as in the doc) but that didn't work
either.  Forgot to mention that in my original posting.

-----Original Message-----
From: Donald Becker [mailto:becker@scyld.com]
Sent: Wednesday, June 26, 2002 2:33 PM
To: Olson, John C
Cc: 'eepro100@scyld.com'
Subject: Re: [eepro100] eepro100 on SuSE Linux


On Wed, 26 Jun 2002, Olson, John C wrote:

> I'm running SuSE 7.3 professional (2.4.16 kernel) on a compaq ML370 with
> Compaq nc3131 NIC's.  I've compiled and installed eepro100 version 1.23
and
> mii-diag version 2.04 (along with pci-scan version 1.08).  I am finding
that
> I am getting a 100mb half-duplex setting on a card that should be
100/full.

Why should it be full duplex?
Setting to forced-full-duplex should never be used.  If autonegotiation
is broken with your switch, you should use half duplex.

> When I try to force the setting (mii-diag -F 100baseTx-FD eth0), I get the
> following return:
> 	Setting the speed to "fixed", Control register 2100.
> 	SIOCSMIIREG on eth0 failed: Operation not permitted

You must be 'root' to change the setting.
(More precisely, you must have the CAP_NET_ADMIN capability.)

> 	Basic registers of MII PHY #1:  2000 780d 02a8 0150 05e1 0081 0000
> 	 Basic mode control register 0x2000: Auto-negotiation disabled, with
> 	 Speed fixed at 100 mbps, half-duplex.

Urrgggg.  You have set the speed to forced half duplex.

> 	 Your link partner is generating 100baseTx link beat  (no
> autonegotiation).

> Have also tried to set this in /etc/modules.conf (options eepro100 debug=1
> options=0x2100 full_duplex=1) with no success.

Huh?  Using options=0x100 sets the transceiver to forced 100-half.
You could use  options=0x200, but you should just use mii-diag as root.

-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993