[eepro100] Speed and Duplexing, Once Again
Danish Mirza
danish@lehman.com
Thu Oct 17 22:34:00 2002
Thanks Ben it works like a champ.
ethtool eth0 display perfect output.
output:
[root@host1 root]# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation? Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
thanks again.
danish
On Thu, 17 Oct 2002, Ben Greear wrote:
> Ben Greear wrote:
> > Danish Mirza wrote:
> >
> >> Thanks for getting back to me so quickly.
> >> Yes you are right about the eepro100.
> >
> >
> >> It shows 100baseTx-FD. Can mii-tool handles gige speeds ?
> >> Do we have another utility by you to check the status.
> >
> >
> > Try ethtool. Actually, I just tried to use it...I can't figure
> > out how to get it to display useful information, but I know older
> > versions did...
>
> For posterity's sake, don't use ethtool -i eth5, use ethtool eth5 instead:
>
> Here's my tg3:
>
> [root@lf-demo1 root]# ethtool eth5
> Settings for eth5:
> Supported ports: [ MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Advertised auto-negotiation: Yes
> Speed: 100Mb/s
> Duplex: Full
> Port: Twisted Pair
> PHYAD: 1
> Transceiver: internal
> Auto-negotiation: on
> Supports Wake-on: g
> Wake-on: d
> Current message level: 0x000000ff (255)
> Link detected: yes
> [root@lf-demo1 root]#
>
>
>
> >
> > Ben
> >
>
>
> --
> Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
> President of Candela Technologies Inc http://www.candelatech.com
> ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
>
>
>