Problems with second D-Link DFE-530TX+ PCI Adapter

[Tom Epperly]

I've got a Debian Potato system with the 2.2.14 kernel.  I want to set up IP
masq, so I can connect a second system via the Linux box.  I bought two D-Link
DFE-530TX+ PCI NICs.  They came with RTL8139 drivers.  My current kernel had a more
recent reversion of the rtl8139.c driver (v1.07), so I am using that one.

eth0 is connected to the cable modem
eth1 is connected to the ethernet card in the Windows box

eth0 is working fine.  I haven't seen any evidence of communication taking
place between eth1 and the Windows box.

Are there any known problems with having two RTL8139's in the same box?  Does
this sounds like a known problem with a known solution?

eth0      Link encap:Ethernet  HWaddr 00:50:BA:D6:5B:CF  
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1466 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1154 errors:0 dropped:0 overruns:0 carrier:0
          collisions:2 txqueuelen:100 
          Interrupt:5 Base address:0xe400 

eth1      Link encap:Ethernet  HWaddr 00:50:BA:D6:5E:BE  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:11 Base address:0xe800 

Any suggestions or comments would be welcome.  Please send replies to me
instead of the list.

Tom

-- 
Spruce: It's everywhere you want to be

 | To unsubscribe, send mail to Majordomo@cesdis.gsfc.nasa.gov, and within the
 |  body of the mail, include only the text:
 |   unsubscribe this-list-name youraddress@wherever.org
 | You will be unsubscribed as speedily as possible.