[realtek] Compile problems

[Oliver Bienert]

I compiled rtl8139.c by hand using and adapting (I just changed the path to
pcmcia so it fits my system) the commandline at the end of rtl8139.c and
copied pci-scan.o and realtek_cb.o to /lib/modules/2.2.18/pcmcia.
In etc/pcmcia/realtek.conf I updated:

device "realtek_cb"
    class "network"  module "cb_enabler", "pci-scan", "cb_shim",
"realtek_cb"

card "Realtek Rtl8139"
    manfid 0x0000, 0x024c
    bind "realtek_cb"

Now it seems to work...
Donald, thank you for your hint concerning the sources,

Oliver

----- Original Message -----
From: "Oliver Bienert" <obienert@gmx.de>
To: <realtek@scyld.com>
Sent: Thursday, May 10, 2001 1:49 PM
Subject: Re: [realtek] Compile problems


> I had the sources for 2.4 kernel installed...
> Now everything works fine, however it doesn't seem to produce any *_cb.o
> files and no cb_shim.o. The sources of the pcmcia packages reside in
> /usr/src/kernel-modules/pcmcia so I changed the path in the Makefile to:
> PCMCIA=/usr/src/kernel-modules/pcmcia/include
> But still I can't get any *_cb.o and cb_shim file.
>
> By the way, I looked into /lib/modules/pcmcia after installing pcmcia
> (3.1.22) and there is already a realtek_cb.o and a cb_shim.o as well as a
> pci-scan and cb_enabler.o file. But when I start my box it says:
> /lib/modules/2.2.18/pcmcia/realtek_cb.o: init_module: Device or resource
> busy
>
> Strange enough, yesterday, when I first tried to get the card working it
> said:
> socket 1: unsupported card Realtek .....
> PCI id: 0x000, 0x024c
> Now, after updating pcmcia, it says:
> PCI id: 0x10ec, 0x8138
> But only I when change the config line to:
> card "RealTek Rtl8139"    manfid 0x0000, 0x024c  bind "realtek_cb"
> it tries to load the module.
>
> Oliver
>
> ----- Original Message -----
> From: "Donald Becker" <becker@scyld.com>
> To: "Oliver Bienert" <obienert@gmx.de>
> Cc: <realtek@scyld.com>
> Sent: Wednesday, May 09, 2001 11:47 PM
> Subject: Re: [realtek] Compile problems
>
>
> > On Wed, 9 May 2001, Oliver Bienert wrote:
> >
> > > bash-2.04# make
> > >
>
gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -I/usr/src/linux/inc
> > > lude -pipe -fno-strength-reduce -DMODVERSIONS   -c -o pci-scan.o
> pci-scan.c
> > > pci-scan.c: In function `pci_drv_register':
> > > pci-scan.c:158: structure has no member named `base_address'
> > > pci-scan.c:132: warning: `pciaddr' might be used uninitialized in this
> > > function
> > > make: *** [pci-scan.o] Error 1
> > >
> > > I remember something seen in the depths of the list's archives but
> didn't
> > > found it anymore. I am using Suse Linux 7.1 with a 2.2.18 Kernel.
> > > Can someone help me out?
> >
> > Is the kernel source at /usr/src/linux/ correct for your system?
> > There are Makefile options if you have the correct kernel source in
> > e.g. /usr/src/linux-2.2.18/
> >
> > Donald Becker becker@scyld.com
> > Scyld Computing Corporation http://www.scyld.com
> > 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
> > Annapolis MD 21403 410-990-9993
> >
>
>
> _______________________________________________
> realtek mailing list
> realtek@scyld.com
> http://www.scyld.com/mailman/listinfo/realtek
>