[realtek] PCI device was not assigned an IRQ
Johannes Derek
JohannesDerek@compuserve.de
Thu Nov 22 11:35:00 2001
I have installed Linux From Scratch on my Acer Travelmate 512T. I downloaded
the pcmcia-cs-3.1.29 package and the RTL8139 drivers and installed it
according to the instructions. Now I always get the error: "PCI device
'RealTek RTL8139 Fast Ethernet' was not assigned an IRQ". (as you can see
below my in sys.log).
Could you please help me?
Thanks
JD
Sorry for my poor English
SYS.LOG:
...
kernel: Linux PCMCIA Card Services 3.1.29
kernel: kernel build: 2.4.5 #4 SMP Thu Nov 22 17:14:16 CET 2001
kernel: options: [pci] [cardbus] [apm]
kernel: Intel ISA/PCI/CardBus PCIC probe:
kernel: PCI: Guessed IRQ 9 for device 00:13.0
kernel: PCI: The same IRQ used for device 00:13.1
cardmgr[59]: + Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters
cardmgr[59]: + /lib/modules/2.4.5/pcmcia/rtl8139.o: init_module: No such
device
cardmgr[59]: + /lib/modules/2.4.5/pcmcia/rtl8139.o: insmod
/lib/modules/2.4.5/pcmcia/rtl8139.o failed
cardmgr[59]: + /lib/modules/2.4.5/pcmcia/rtl8139.o: insmod rtl8139 failed
cardmgr[59]: + Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters
cardmgr[59]: modprobe exited with status 255
cardmgr[59]: executing: 'insmod /lib/modules/2.4.5/pcmcia/rtl8139.o'
cardmgr[59]: + /lib/modules/2.4.5/pcmcia/rtl8139.o: init_module: No such
device
cardmgr[59]: + Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters
cardmgr[59]: insmod exited with status 1
kernel: PCI: Guessed IRQ 9 for device 00:13.1
kernel: PCI: The same IRQ used for device 00:13.0
kernel: O2Micro OZ6832/33 rev 34 PCI-to-CardBus at slot 00:13, mem
0x10000000
kernel: host opts [0]: [ring] [pci/way] [pci irq 9] [lat 32/176] [bus
2/5]
kernel: host opts [1]: [ring] [pci/way] [pci irq 9] [lat 32/176] [bus
6/9]
kernel: ISA irqs (default) = 3,4,7,10,11,12 PCI status changes
kernel: cs: cb_alloc(bus 6): vendor 0x10ec, device 0x8139
kernel: rtl8139.c:v1.15 8/1/2001 Donald Becker, becker@scyld.com.
kernel: http://www.scyld.com/network/rtl8139.html
kernel: PCI device 'RealTek RTL8139 Fast Ethernet' was not assigned an IRQ.
kernel: It will not be activated.
kernel: rtl8139.c:v1.15 8/1/2001 Donald Becker, becker@scyld.com.
kernel: http://www.scyld.com/network/rtl8139.html
kernel: PCI device 'RealTek RTL8139 Fast Ethernet' was not assigned an IRQ.
kernel: It will not be activated.
kernel: rtl8139.c:v1.15 8/1/2001 Donald Becker, becker@scyld.com.
kernel: http://www.scyld.com/network/rtl8139.html
kernel: PCI device 'RealTek RTL8139 Fast Ethernet' was not assigned an IRQ.
kernel: It will not be activated.
cardmgr[59]: get dev info on socket 1 failed: Resource temporarily
unavailable