[realtek] Device or resource busy

[tk]

Long story short,
I was having MB problems.  I had this replaced.  At some point either during
the problems or thereafter I booted linux and the auto-config whatever removed
this device.  I have since reloaded Redhat but it still will not recognize
device.
I may have the card in a different slot now, but I tried moving the card
through all slots with no outcome.
I have also tried cold boot - no avail.

Funny, the card works fine in Windows.  So, do these cards have flash-rom and
was it maybe flashed by windows?  Or does windows and linux access this card
in different ways?

TK

Donald Becker wrote:

> On Tue, 18 Sep 2001, tk wrote:
>
> > I have a SMC 1211TX card with the rtl8139 chip.  I had installed
> > RedHat6.2 and had my machine up a running with net access.  For some
> > reason I can no longer access this netwrok card.  I consistently get the
> > following message:
> >     /tmp/rtl8139.o: init_module: Device or resource busy
>
> Did your software or hardware configuration change?
>
> If not, check that the board hasn't worked it way loose from the PCI slot.
>
> Donald Becker                           becker@scyld.com
> Scyld Computing Corporation             http://www.scyld.com
> 410 Severn Ave. Suite 210               Second Generation Beowulf Clusters
> Annapolis MD 21403                      410-990-9993
>
> _______________________________________________
> realtek mailing list
> realtek@scyld.com
> http://www.scyld.com/mailman/listinfo/realtek