[realtek] problem installing driver rtl8139

patrick thempel patrick_thempel@yahoo.com
Mon Dec 9 08:56:01 2002


try insmod rtl8139 (without o ) ?

--- Panard <panard@inzenet.org> wrote:
> Hi !
> 
> I've a big problem.
> I've a kernel 2.4.19, and when I make 'insmod
> rtl8139.o', I've the error :
> no surch device
> 
> But, when I make   ./rtl8139-diag -aem, I've the
> ouput :
> rtl8139-diag.c:v2.10 9/18/2002 Donald Becker
> (becker@scyld.com)
>  http://www.scyld.com/diag/index.html
> Index #1: Found a RealTek RTL8139 adapter at 0xd000.
> RealTek chip registers at 0xd000
>  0x000: 96fc5000 00009033 b9f38105 0a00b18d 00002000
> 00002000 00002000 
> 00002000
>  0x020: 00001000 00300028 20004000 00000400 81100000
> 01000000 0000fff0 
> 00000000
>  0x040: 74400000 00000000 fc161dc7 00000000 004d1000
> 00000000 0088e51c 
> 0010042c
>  0x060: 1000000f 01e17809 00000000 00000000 00000704
> 000003c0 60f60c59 
> 7b732660.
> Realtek station address 00:50:fc:96:33:90, chip type
> 'rtl8139C'.
>   Receiver configuration: Reception disabled
>      Rx FIFO threshold 16 bytes, maximum burst 16
> bytes, 8KB ring
>   Transmitter disabled with normal settings, maximum
> burst 16 bytes.
>     Tx entry #0 status 00002000 incomplete, 0 bytes.
>     Tx entry #1 status 00002000 incomplete, 0 bytes.
>     Tx entry #2 status 00002000 incomplete, 0 bytes.
>     Tx entry #3 status 00002000 incomplete, 0 bytes.
>   Flow control: Tx disabled  Rx disabled.
>   The chip configuration is 0x10 0x4d, MII
> full-duplex mode.
>   No interrupt sources are pending.
> Decoded EEPROM contents:
>    PCI IDs -- Vendor 0x10ec, Device 0x8139.
>    PCI Subsystem IDs -- Vendor 0x10ec, Device
> 0x8139.
>    PCI timer settings -- minimum grant 32, maximum
> latency 64.
>   General purpose pins --  direction 0xe5  value
> 0x12.
>   Station Address 00:50:FC:96:33:90.
>   Configuration register 0/1 -- 0x4d / 0xc2.
>  EEPROM active region checksum is 0a28.
>  The RTL8139 does not use a MII transceiver.
>  It does have internal MII-compatible registers:
>    Basic mode control register   0x1000.
>    Basic mode status register    0x7809.
>    Autonegotiation Advertisement 0x01e1.
>    Link Partner Ability register 0x0000.
>    Autonegotiation expansion     0x0000.
>    Disconnects                   0x0000.
>    False carrier sense counter   0x0000.
>    NWay test register            0x0704.
>    Receive frame error count     0x0000.
> 
> Help !
> 
> Thanks
> 
> -- 
>
________________________________________________________
>          panard@inzenet.org               
> http://www.inzenet.org
> _______________________________________________
> realtek mailing list
> realtek@scyld.com
> http://www.scyld.com/mailman/listinfo/realtek


=====
Mit freundlichen Gruessen

Patrick Thempel
mail:patrick_thempel@yahoo.com

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com