[realtek] problem installing driver rtl8139

[Panard]

On Monday 09 December 2002 15:02, you wrote:
> On Monday 09 December 2002 14:55, you wrote:
> > try insmod rtl8139 (without o ) ?
>
> no change !

Here is my complete error message :
Using /lib/modules/2.4.19/kernel/drivers/net/rtl8139.o
/lib/modules/2.4.19/kernel/drivers/net/rtl8139.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including 
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg


I've tried to switch the bios option 'Plug on Play OS' off, but ne change 
too...




> > --- Panard <panard@inzenet.org> wrote:
> > > Hi !
> > >
> > > I've a big problem.
> > > I've a kernel 2.4.19, and when I make 'insmod
> > > rtl8139.o', I've the error :
> > > no surch device
> > >
> > > But, when I make   ./rtl8139-diag -aem, I've the
> > > ouput :
> > > rtl8139-diag.c:v2.10 9/18/2002 Donald Becker
> > > (becker@scyld.com)
> > >  http://www.scyld.com/diag/index.html
> > > Index #1: Found a RealTek RTL8139 adapter at 0xd000.
> > > RealTek chip registers at 0xd000
> > >  0x000: 96fc5000 00009033 b9f38105 0a00b18d 00002000
> > > 00002000 00002000
> > > 00002000
> > >  0x020: 00001000 00300028 20004000 00000400 81100000
> > > 01000000 0000fff0
> > > 00000000
> > >  0x040: 74400000 00000000 fc161dc7 00000000 004d1000
> > > 00000000 0088e51c
> > > 0010042c
> > >  0x060: 1000000f 01e17809 00000000 00000000 00000704
> > > 000003c0 60f60c59
> > > 7b732660.
> > > Realtek station address 00:50:fc:96:33:90, chip type
> > > 'rtl8139C'.
> > >   Receiver configuration: Reception disabled
> > >      Rx FIFO threshold 16 bytes, maximum burst 16
> > > bytes, 8KB ring
> > >   Transmitter disabled with normal settings, maximum
> > > burst 16 bytes.
> > >     Tx entry #0 status 00002000 incomplete, 0 bytes.
> > >     Tx entry #1 status 00002000 incomplete, 0 bytes.
> > >     Tx entry #2 status 00002000 incomplete, 0 bytes.
> > >     Tx entry #3 status 00002000 incomplete, 0 bytes.
> > >   Flow control: Tx disabled  Rx disabled.
> > >   The chip configuration is 0x10 0x4d, MII
> > > full-duplex mode.
> > >   No interrupt sources are pending.
> > > Decoded EEPROM contents:
> > >    PCI IDs -- Vendor 0x10ec, Device 0x8139.
> > >    PCI Subsystem IDs -- Vendor 0x10ec, Device
> > > 0x8139.
> > >    PCI timer settings -- minimum grant 32, maximum
> > > latency 64.
> > >   General purpose pins --  direction 0xe5  value
> > > 0x12.
> > >   Station Address 00:50:FC:96:33:90.
> > >   Configuration register 0/1 -- 0x4d / 0xc2.
> > >  EEPROM active region checksum is 0a28.
> > >  The RTL8139 does not use a MII transceiver.
> > >  It does have internal MII-compatible registers:
> > >    Basic mode control register   0x1000.
> > >    Basic mode status register    0x7809.
> > >    Autonegotiation Advertisement 0x01e1.
> > >    Link Partner Ability register 0x0000.
> > >    Autonegotiation expansion     0x0000.
> > >    Disconnects                   0x0000.
> > >    False carrier sense counter   0x0000.
> > >    NWay test register            0x0704.
> > >    Receive frame error count     0x0000.
> > >
> > > Help !
> > >
> > > Thanks
> > >
> > > --
> >
> > ________________________________________________________
> >
> > >          panard@inzenet.org
> > > http://www.inzenet.org
> > > _______________________________________________
> > > realtek mailing list
> > > realtek@scyld.com
> > > http://www.scyld.com/mailman/listinfo/realtek
> >
> > =====
> > Mit freundlichen Gruessen
> >
> > Patrick Thempel
> > mail:patrick_thempel@yahoo.com
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> > http://mailplus.yahoo.com

-- 
________________________________________________________
         panard@inzenet.org                http://www.inzenet.org