[realtek] RTL8100B non-functioning

Orlando Andico orly@mozcom.com
Fri Oct 11 00:20:01 2002


On Tue, 8 Oct 2002, Donald Becker wrote:
..
> > 'mii-tool -w' returns correct link state for both ethernet ports.  
> 
> You can use use 'mii-diag --watch eth0' to monitor the link and
> negotiation status.

Used 'mii-diag' on it. With no cable.. then add a cable..

Baseline value of MII BMSR is 7809
MII BMSR now 782d: Good link, NWay done, No Jabber (41e1).
  New link partner capability is 41e1 0001: 10/100 HD+FD switch

Seems like the physical layer is ok. But I can't ping.


---
Orlando Andico <orly@mozcom.com>
Mosaic Communications, Inc.