[realtek] RealTek 8201L PHY drivers

[John Palmieri]

On Fri, 2002-09-06 at 10:45, Donald Becker wrote:
> On 6 Sep 2002, John Palmieri wrote:
> 
> > On Thu, 2002-09-05 at 11:06, Donald Becker wrote:
> >  
> > > What is the PCI ID?
> > 
> > Here is what I get from /proc/pci:
> > Bus 0 Device 4 Function 0:
> > 	Ethernet Controller: Nvidia Unkown Device(Rev 194)
> > 	Vendor id=10de Device id=1c3
> 
> That's not a standard ID for a known NIC.
> It may be a new NIC type from Nvidia (which is well known for not
> providing Linux support), or a standard chip with a substitute ID
> programmed into the EEPROM.
> 
> > 	Fastdevsel. Fast back-to-back capable. Irq 6. Master capable. No
> > bursts. Min Gnt=1. Max Lat=20.
> 
> IRQ6???
> 
> > 	Non-prefetchable 32 bit memory at 0xee000000[0xee000000] I/O at
> > 0xd800[0xd801]
> 
> Try running 'rtl8139-diag -af -p 0xd800'.  It's probably not a Realtek
> chip, but I might be able to tell if it's similar to a known NIC.
I'll go ahead and install the Linux system from CD.  As it is now I am
just booting from a Debian 3.0 install cd and dropping down to a shell.
I was hoping to install from the network.  Where do I get the
rtl8139-diag program or source? Does it come with Debian or can I grab
it from scyld.com?

Thanks for the help.

--
J5

> 
> -- 
> Donald Becker				becker@scyld.com
> Scyld Computing Corporation		http://www.scyld.com
> 410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
> Annapolis MD 21403			410-990-9993