accton EN1207D TX

[Donald Becker]

On Wed, 23 Dec 1998, Tom Secula wrote:

> how do i get my accton card to be recognized at boot time ? running linux
> 2.1.128.
...
> tulip-diag -a -p 0x2800 gives :
> tulip-diag.c:v1.06 9/18/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
> Digital DC21040 Tulip Tulip chip registers at 0x2800:
>   69e80000 80004300 00002000 00002000 00fd5800 00fd4800 00fcd000 0000fff0
>   70000000 4308e39e 000d1000 0000e10c 1000000f 00000000 00000004 78fa8388
...
> lspci gives :
> 
> 00:00.0 Host bridge: Intel Corporation 440LX - 82443LX PAC Host (rev 03)
> 00:01.0 PCI bridge: Intel Corporation 440LX - 82443LX PAC AGP (rev 03)
> 00:04.0 SCSI storage controller: Adaptec AIC-7881U
> 00:05.0 Ethernet controller: Accton Technology Corporation: Unknown device 1211

The Accton board actually uses a RTL8139, not a Tulip-compatible chip.
Use the rtl8139.c driver:
  http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.c

Donald Becker					  becker@cesdis.gsfc.nasa.gov
USRA-CESDIS, Center of Excellence in Space Data and Information Sciences.
Code 930.5, Goddard Space Flight Center,  Greenbelt, MD.  20771
301-286-0882	     http://cesdis.gsfc.nasa.gov/people/becker/whoiam.html