ASIX AX88140AQ-Problem
Christian Kuehn (Hostmaster)
christian@hamburg.gay-web.de
Sat Jan 16 19:45:30 1999
Hi !
Just after installing a new Fast-Ethernet-NIC, I have only trouble.
I try to use the tulip.c-driver as described by Donald.
Here are the results from mii-diag, log-files and /proc/pci :
Result after doing mii-diag
jeffrey:/home/tks # ./mii-diag -A 100baseTx-HD eth1
Setting the media capability advertisement register of PHY #1 to
0x0081.
Basic registers of MII PHY #1: 1000 782d 0181 b800 0081 0000 0000 0000.
Basic mode control register 0x1000: Auto-negotiation enabled.
You have link beat, and everything is working OK.
Your link partner is strange, status 0000.
jeffrey:/home/tks #
******************
Result after doing "insmod tulip debug=6"
Jan 17 01:30:13 jeffrey kernel: Found ASIX AX88140 at PCI I/O address
0xb000.
Jan 17 01:30:13 jeffrey kernel: tulip.c:v0.90f 12/17/98
becker@cesdis.gsfc.nasa.gov
Jan 17 01:30:13 jeffrey kernel: eth1: ASIX AX88140 at 0xb000, 00 80 ad
41 fe
4a, IRQ 11.
Jan 17 01:30:13 jeffrey kernel: eth1: EEPROM default media type
Autosense.
Jan 17 01:30:13 jeffrey kernel: eth1: MII interface PHY 0, setup/reset
sequences 0/0 long, capabilities e0 78.
Jan 17 01:30:13 jeffrey kernel: eth1: Index #0 - Media MII (#11)
described
by a 21140 MII PHY (1) block.
Jan 17 01:30:13 jeffrey kernel: eth1: MII transceiver #1 config 1000
status
782d advertising 0081.
Jan 17 01:30:13 jeffrey kernel: eth1: Advertising 01e1 on PHY 1,
previously
advertising 0081.
********************
Result after doing "ifconfig eth1 192.168.100.1"
Jan 17 01:30:57 jeffrey kernel: eth1: tulip_open() irq 11.
Jan 17 01:30:57 jeffrey kernel: eth1: Advertising 01e1 on PHY 0 (1).
Jan 17 01:30:57 jeffrey kernel: eth1: Using media type MII, CSR12 is 00.
Jan 17 01:30:57 jeffrey kernel: eth1: Done tulip_open(), CSR0 00200800,
CSR5 00
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt csr5=0x00670004 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt csr5=0x00660000 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: exiting interrupt, csr5=0x660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt csr5=0x00670004 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt csr5=0x00660000 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: exiting interrupt, csr5=0x660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt csr5=0x00670004 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt csr5=0x00660000 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: exiting interrupt, csr5=0x660000.
Jan 17 01:31:02 jeffrey kernel: eth1: Media selection tick, status
00660000
mode 000c2002 SIA 00000100 00000000 3fac3cfc 00000000.
Jan 17 01:31:02 jeffrey kernel: eth1: MII status 782d, Link partner
report
0000, CSR12 100, HD.
*****************
Now: route add -net 192.168.100.0 eth1
Result after doing "traceroute 192.168.100.2"
(This host is already established)
Jan 17 01:34:33 jeffrey kernel: eth1: interrupt csr5=0x00678424 new
csr5=0x006
Jan 17 01:34:33 jeffrey kernel: eth1: Transmit error, Tx status
00008002.
Jan 17 01:34:33 jeffrey kernel: eth1: interrupt csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:33 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
Jan 17 01:34:38 jeffrey kernel: eth1: interrupt csr5=0x00270404 new
csr5=0x002
Jan 17 01:34:38 jeffrey kernel: eth1: interrupt csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:38 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
Jan 17 01:34:43 jeffrey kernel: eth1: interrupt csr5=0x00270404 new
csr5=0x002
Jan 17 01:34:43 jeffrey kernel: eth1: interrupt csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:43 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
Jan 17 01:34:48 jeffrey kernel: eth1: interrupt csr5=0x00270404 new
csr5=0x002
Jan 17 01:34:48 jeffrey kernel: eth1: interrupt csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:48 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
*********************
Result from /proc/pci
jeffrey:/home/tks # cat /proc/pci |more
PCI devices found:
Bus 0, device 12, function 0:
Ethernet controller: ASIX 88140 (rev 3).
Medium devsel. Fast back-to-back capable. IRQ 11. Master
Capable. Lat
ncy=32. Min Gnt=20.Max Lat=40.
I/O at 0xb000.
Non-prefetchable 32 bit memory at 0xe3800000.
Bus 0, device 11, function 0:
Ethernet controller: Winbond NE2000-PCI (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 12.
I/O at 0xb400.
Any idea whats happened ???
Thanks in advance!
Christian
PS
With Win95 everything works!
--
Christian Kuehn, 20257 Hamburg
Tel. (040) 40 19 72 32 / Fax. (040) 40 19 72 30
eMail: christian@hamburg.gay-web.de
http://hamburg.gay-web.de/~tks
Und immer einen Besuch wert: http://hamburg.gay-web.de
******************************************************