Problem with Linksys etherfast 10/100

[Steve Bergman]

Hi,

As an addendum, I should add that on the machine that loses network
connectivity, frames: and (I think) Carrier: are always greater that the
Rx and TX errors on the same line of ifconfig output.  (Is that odd or
am I not looking at this right?) On the other two machines, one gets no
errors while the other gets exactly the same number of "frames:" as RX
"errors:" and their networking does not freeze.  In my current testing it
gets no TX errors.  I said earlier
that it got both transmit and receive errors but that was apparently
incorrect.

Thanks, :-)
Steve Bergman