Where to put insmod command?

[Ted_Rule@flextech.co.uk]

What you almost certainly need is mods to the conf.modules file to set the
options insmod uses when it loads any given module.

( This effectively overrides any given modules' "factory" default settings )


As in , for instance, on my wonky old RH5.2 box:


$ cat /etc/conf.modules
alias scsi_hostadapter aic7xxx
alias eth0 tulip
options tulip debug=1 options=0
alias net-pf-5 off


to set the SCSI adaptor, map eth0 to a tulip card, set debug level and AutoNeg
on the Tulip
card, and disable AppleTalk support ...

Ted






*****************************************************************
This E-mail message, including any attachments, is intended
only for the person or entity to which it is addressed,
and may contain confidential information.

If you are not the intended recipient, any review, retransmission,
disclosure, copying, modification or other use of this E-mail message
or attachments is strictly forbidden.

If you have received this E-mail message in error, please contact the
author and delete the message and any attachments from your computer.

You are also advised that the views and opinions expressed in this E-mail
message and any attachments are the author's own, and may not reflect the
views and opinions of FLEXTECH Television.
*****************************************************************
-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-tulip-bug-request@beowulf.org