[tulip-bug] tulip.c:v0.92w, FastLineFO-II (100BaseFX)

[Christoph Heine]

Hello,

I've tried tulip v0.92w from scyld and have problems with two
FastLine FO-II (100BaseFX) using a 2.4.3 Kernel. It basically doesn't
work. 
The 2.4.3 Kernel driver has Problems too, generating paketloss and so
on, as described in another bugreport.

Compiling tulip v0.92w works, but when doing insmod, it puts this
messages in the syslog and the cards don't work:

Aug  1 12:01:15 roto kernel: tulip.c:v0.92w 7/9/2001  Written by Donald
Becker <becker@scyld.com>
Aug  1 12:01:15 roto kernel:   http://www.scyld.com/network/tulip.html
Aug  1 12:01:15 roto kernel: eth1: Digital DS21143-xD Tulip rev 65 at
0xc898f000, 00:00:CB:55:06:67, IRQ 12.
Aug  1 12:01:15 roto kernel: eth1:  EEPROM default media type MII
100baseTx.
Aug  1 12:01:15 roto kernel: eth1:  Index #0 - Media MII (#11)
described by a 21142 MII PHY (3) block.
Aug  1 12:01:15 roto kernel: eth1:  Index #1 - Media Transceiver reset
(#31) described by a 21143 reset method (5) block.
Aug  1 12:01:15 roto kernel: eth1: ***WARNING***: No MII transceiver
found!
Aug  1 12:01:15 roto kernel: eth2: Digital DS21143-xD Tulip rev 65 at
0xc8991000, 00:00:CB:55:06:12, IRQ 10.
Aug  1 12:01:15 roto kernel: eth2:  EEPROM default media type MII
100baseTx.
Aug  1 12:01:15 roto kernel: eth2:  Index #0 - Media MII (#11)
described by a 21142 MII PHY (3) block.
Aug  1 12:01:15 roto kernel: eth2:  Index #1 - Media Transceiver reset
(#31) described by a 21143 reset method (5) block.
Aug  1 12:01:15 roto kernel: eth2: ***WARNING***: No MII transceiver
found!
Aug  1 12:01:40 roto kernel: Trying to free nonexistent resource
<c8991000-c899107f>
Aug  1 12:01:40 roto kernel: Trying to free nonexistent resource
<c898f000-c898f07f>

the last two entries appeard after doing rmmod tulip

Best regards,
Christoph Heine (still very unhappy with this card)