Modifying tulip.c to force 100baseT mode

[Nicholas Edwards]

I think the forcing of the card is done here....




#define MAX_UNITS 8
/* Used to pass the full-duplex flag, etc. */
static int full_duplex[MAX_UNITS] = {0, };
static int options[MAX_UNITS] = {0, }; <------
static int mtu[MAX_UNITS] = {0, };                      


where the arrow is, change the 0 to a 3

On Sat, 22 Aug 1998, Oscar Stiffelman wrote:

> Hi,
> 
> I have been told that my 21143 Tulip card will work at 100 MBits/sec, but
> that the autosese feature is not working correctly in the Alpha PC164LX,
> with Alpha Bios, and Arc Console (not SRM).
> 
> Therefore, I would like to modify tulip.c to force 100 MBits/sec operation.
> 
> If someone familiar with the driver could advise me on the safest way to
> make such a modification (i.e. to tell it not to autosense, and to hard code
> the mode), I would greatly appreciate it.
> 
> Thanks,
> 
> 
> Oscar Stiffelman
>