SVEC FD1002-TX

[Kenji Yasaka]

Hello all,

I've bought SVEC's FD1002-TX
(http://www.svec.com.tw/Products/fd1002.htm) which has 21143-PD and
Davicom DM9101F on the board, but I wasn't able to use it on
Linux(2.2.1) with tulip driver version 0.90q. I've tried statically
selecting the media by modifying tulip.c but it didn't work. Can
anybody help me with this?

The tulip-diag for this card looks like this:
--
tulip-diag.c:v1.08 2/28/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21143 Tulip adapter at 0xe400.
Digital DS21143 Tulip Tulip chip registers at 0xe400:
  f8000000 ffffffff ffffffff ff7dffff ffe3bff6 f0000000 32040040 f3fe0000
  e0000000 fffd83ff ffffffff 00000000 000000c6 ffff0000 ffffffff 8ff0c000
 Port selection is MII, half-duplex.
 Transmit stopped, Receive stopped, half-duplex.
  The Rx process state is 'Stopped'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
EEPROM contents:
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
 ID CRC 0xe3 (vs. 00), complete CRC 3b59d4af.
  * An old-style EEPROM layout was found.
  * The old-style layout does not contain transceiver control information.
  * This board may not work, or may work only with a subset of transceiver
  * options or data rates.
 MII PHY found at address 8, status 0x782d.
 MII PHY #8 transceiver registers:
   1000 782d 0181 b802 0021 0021 0000 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   0640 1088 6800 0000 0000 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0000 0000.
 Basic mode control register 0x1000: Auto-negotiation enabled.
 Basic mode status register 0x782d ... 782d.
   Link status: established.
   Capable of  100baseTx-FD 100baseTx 10baseT-FD 10baseT.
   Able to perform Auto-negotiation, negotiation complete.
 Vendor ID is 00:60:6e:--:--:--, model 0 rev. 2.
   Vendor/Part: Davicom (unknown type).
 I'm advertising 0021: 10baseT
   Advertising no additional info pages.
   IEEE 802.3 CSMA/CD protocol.
 Link partner capability is 0021: 10baseT.
   Negotiation did not complete.
  Internal autonegotiation state is 'Autonegotiation disabled'.
---

regards,

Kenji Yasaka
Keio University Graduate School of Media and Governance
E-mail: ky@ymo.org