[tulip] Linksys LNE100TX version 4.0 (more information)

[Jon Schewe]

I don't have a 2.4preX kernel installed, I'm using 2.2.16 SMP.  I do have the
new 2.0 drivers installed from the tulip web site though.  Are the 2.4preX
drivers any different than the ones on the tulip website?

Christopher Smith <x@philstone.com> writes:

> Does the 2.4preX driver work?
> 
> --Chris
> 
> --On Tuesday, August 08, 2000 9:29 PM -0500 Jon Schewe 
> <jpschewe@eggplant.mtu.net> wrote:
> 
> > Ok.  I've done a little bit of testing here to see how I can get this
> > card to work.  I'm trying to connect it to a Linksys 10/100 switch.
> > Linux can find the card, but the activity light blinks like mad and Linux
> > complains about Recieve errors.  So apparently the tulip driver under
> > Linux isn't working quite right with the autonegotion, a known problem.
> > I can't figure out how to force the card to 100 full duplex, so I'm
> > trying the card in other systems. The card works fine in Windows 95,
> > which probably isn't very helpful here. However I do have FreeBSD 3.2 up
> > on a system as well and the card happens to work fine with it.  Since
> > Linux and FreeBSD are both open source I don't suppose someone that knows
> > more about the driver internals than me, should be most everyone, could
> > look at the FreeBSD driver and figure out what's wrong with the Linux
> > one.  It's using the "DEC/Intel 21143 (and clones) PCI fast ethernet
> > card" driver, according to the setup program.
> >
> > --
> > Jon Schewe
> > http://eggplant.mtu.net/~jpschewe
> > jpschewe@eggplant.mtu.net
> >
> >
> > _______________________________________________
> > tulip mailing list
> > tulip@scyld.com
> > http://www.scyld.com/mailman/listinfo/tulip
> 
> 
> 
> 
> 
> _______________________________________________
> tulip mailing list
> tulip@scyld.com
> http://www.scyld.com/mailman/listinfo/tulip

-- 
Jon Schewe 
http://eggplant.mtu.net/~jpschewe
jpschewe@eggplant.mtu.net