[tulip] ADMtek AL985 Centaur-P adapter ?

[ktt]

I've used a driver which came with the 2.2.17pre6
kernel distribution.

but the strange thing:

debian:/# insmod tulip
Using /lib/modules/2.2.17/net/tulip.o
/lib/modules/2.2.17/net/tulip.o: init_module:
Device
or resource busy
Hint: this error can be caused by incorrect module
parameters, including invalid IO or IRQ parameters

what it could be?
interrupt 9, which card was using was free, I saw.

--- David Shochat <shochat@acm.org> wrote:
> Are you using the tulip from scyld.com or are you
> trying to use the one 
> that comes with the kernel distribution? Only the
> former has ever worked 
> for me (using a different variant of the LinkSys
> card). The reason for 
> "ADMtek ..." is that that is the chip that your card
> actually uses. Mine 
> is and ADMTek Comet.
> 
> ktt wrote:
> 
> > I have problems while configuring linksys fast
> > ethernet  10/100
> > card. when I loading tulip.o compilled as kernel
> > module, getting
> > 
> > debian:/# insmod tulip
> > Using /lib/modules/2.2.17/net/tulip.o
> > /lib/modules/2.2.17/net/tulip.o: init_module:
> Device
> > or resource busy
> > Hint: this error can be caused by incorrect module
> > parameters, including invalid IO or IRQ parameters
> > 
> > while /proc/pci
> > 
> > shows:
> > 
> >  Bus  0, device  19, function  0:
> >     Ethernet controller: Unknown vendor Unknown
> device
> > (rev 17).
> >       Vendor id=1317. Device id=985.
> >       Medium devsel.  Fast back-to-back capable. 
> IRQ
> > 9.  Master Capable.  Latency=64.  Min Gnt=255.Max
> > Lat=255.
> >       I/O at 0xf800 [0xf801].
> >       Non-prefetchable 32 bit memory at 0xfedffc00
> > [0xfedffc00].



__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/