[tulip] Followup to: MAC address not reported correctly ??!!!!

[c.s.h.]

I realized it might be helpful if I supplied some more info.  Here's the
tulip.o and tulip-diag -e -e output:

tulip.c:v0.92i 7/31/2000  Written by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/tulip.html
eth0: Digital DS21140 Tulip rev 34 at 0xc8859000, 00:40:F0:40:FE:68, IRQ
9.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
block.
eth0:  MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0:  Advertising 0161 on PHY 1, previously advertising 01e1.          


[root@localhost csh]# ./tulip-diag -e -e
tulip-diag.c:v2.04 9/26/2000 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a Digital DS21140 Tulip adapter at 0xe800.
 Port selection is MII, half-duplex.
 Transmit started, Receive started, half-duplex.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
EEPROM size is 6.
PCI Subsystem IDs, vendor 2646, device 0001.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:40:F0:40:FE:68.
EEPROM transceiver/media description for the Digital DS21140 Tulip chip.
Leaf node at offset 30, default media type 0800 (Autosense).
 CSR12 direction setting bits 0x00.
 1 transceiver description blocks:
  Media MII, block type 1, length 12.
   MII interface PHY 0 (media type 11).
    No MII reset sequence.    No MII initialization sequence.
    Media capabilities are 7800, advertising 0161.
    Full-duplex map 5000, Threshold map 1800.
EEPROM contents:
  2646 0001 0000 0000 0000 0000 0000 0000
  006b 0103 4000 40f0 68fe 1e00 0000 0800
  0100 018c 0000 0000 6078 0001 0050 0018
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 344b c1f2
 ID block CRC 0x6b (vs. 0x6b).
  Full contents CRC 0x71e3 (read as 0xc1f2).
 MII PHY found at address 1, status 0x782d.
 MII PHY #1 transceiver registers:
   1000 782d 0016 f831 0161 0021 ffff ffff
   ffff ffff ffff ffff ffff ffff ffff ffff
   0022 ff00 0000 fff0 00a0 ffff ffff ffff
   ffff ffff ffff ffff ffff ffff ffff ffff.