[tulip] Linksys 10/100 Card

[Kevin Barry]

I just d/led the package driver file this evening and loaded it. I used the
dmesg command and got what looks like a copy of a bootup seq but I don't see
anything that refers to the NIC or any associated drivers. The information
covers CPU, hard and floppy drives, CD etc.

-----Original Message-----
From: Donald Becker [mailto:becker@scyld.com]
Sent: Sunday, December 31, 2000 11:13 PM
To: Kevin Barry
Cc: tulip@scyld.com
Subject: Re: [tulip] Linksys 10/100 Card


On Sun, 31 Dec 2000, Kevin Barry wrote:

> I'm using the latest Linksys 10/100 NIC with Red Hat 6.2, kernel 2.2.14. I
> d/led the latest drivers in package form from scyld.com and installed the
> package using GnomeRPM.
>
> I get the following error when I run insmod tulip.
>
> Using /lib/modules/2.2.14-5.0/net/tulip.o
> /lib/modules/2.2.14-5.0/net/tulip.o: init_module:device or resource busy

Are you actually running the updated driver?
You can check by reading the log with 'dmesg'.  The driver puts the version
number into the log even if it doesn't find a supported card.

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993