[tulip] Please help... maze of twisty passages w/Linksys PCMPC200

[Colin Steele]

I'm a bit lost, here, and would love a pointer or two.  I've recently
installed redhat 7.2 (kernel 2.4.7-10) on a old thinkpad 240 laptop.
It has a Linksys etherfast 10/100 cardbus pc card, ver. 2 PCMPC200.

I've added a section to /etc/pcmcia/config.opts:

	card "Linksys PCMPC200"
	    pci 0x8086, 0x7192
	    bind "tulip"

But when I boot, I get a high beep and then a low, sad beep. :(

I'm confused.  Do I need to build a tulip_cb module?  What's the
relationship between cb_shim, pci-scan, and hotplug?  I'm lost.

Here's the relevant portion of the log:

kernel: Linux version 2.4.7-10 (bhcompile@stripples.devel.redhat.com)
(gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6
17:27:27 EDT 2001

...

pcmcia: Starting PCMCIA services:
pcmcia:  modules
kernel: Linux Kernel Card Services 3.1.22
kernel:   options:  [pci] [cardbus] [pm]
kernel: PCI: Found IRQ 11 for device 00:0a.0
kernel: Yenta IRQ list 0698, PCI irq11
kernel: Socket status: 30000020
kernel: cs: cb_alloc(bus 0): vendor 0x8086, device 0x7192
kernel: PCI: Failed to allocate resource 0(14000000-10bfffff) for
00:00.0
pcmcia:  cardmgr.
rc: Starting pcmcia:  succeeded
cardmgr[720]: starting, version is 3.1.22
cardmgr[720]: config error, file './config.opts' line 8: no function
bindings
cardmgr[720]: watching 1 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177
0x370-0x377 0x398-0x39f 0x3b8-0x3df 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[720]: initializing socket 0
cardmgr[720]: socket 0: Linksys PCMPC200
cardmgr[720]: executing: 'modprobe cb_enabler'
cardmgr[720]: executing: 'modprobe tulip'
kernel: Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
cardmgr[720]: +
/lib/modules/2.4.7-10/kernel/drivers/net/tulip/tulip.o: init_module:
No such device
cardmgr[720]: +
/lib/modules/2.4.7-10/kernel/drivers/net/tulip/tulip.o: insmod
/lib/modules/2.4.7-10/kernel/drivers/net/tulip/tulip.o failed
cardmgr[720]: +
/lib/modules/2.4.7-10/kernel/drivers/net/tulip/tulip.o: insmod tulip
failed
cardmgr[720]: + Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters
cardmgr[720]: modprobe exited with status 255
cardmgr[720]: module /lib/modules/2.4.7-10/pcmcia/tulip.o not
available
xinetd[763]: xinetd Version 2.3.3 started with libwrap options
compiled in.
xinetd[763]: Started working: 1 available service
/etc/hotplug/pci.agent: ... no drivers for PCI slot 
cardmgr[720]: get dev info on socket 0 failed: Resource temporarily
unavailable


-- 
Colin Steele
colin@colinsteele.org / www.colinsteele.org / www.rubycookbook.org


		   From "The Hacker's Dictionary":
		     suitable win: n. See {win}.