3c509.c v1.16E missing!

[John Dunlap]

I'm running several Dell GX1 with version 3c905B (version 4 as I recall)
with 3c59x.c:v0.99E with Rob Riggs patch 7 from
http://www.devilsthumb.com/~rob/#boomerang No problems at all, but
then again I'm on an HP switch and only at 10 Mbps 10bT.  I've run the
flood ping stuff against each other on an isolated hub (again 10 Mbps)
with no ill effects.  -- John

> 
> Joseph Malicki <jmalicki@geocities.com> writes:
> 
> > > Does anyone know where 3c509.c v1.16E is hiding?
> > 
> > Are you sure you dont have a 3c905B? That's what Dells come with
> > nowadays, and it uses the 3c59x driver....
> 
> Whoops, dyslexic mistake on my part, sorry, yes it is the 3c905B :)
> 
> However, I did replace the 3c59x.o module as well, still no dice.
> Works fine with the new 3c59x.o under the 2.0.34 kernel, just not
> under the 2.0.35.
> 
> Anybody have any ideas?  (Or am I going to have to back out to the
> 2.0.34 kernel again...)
> 
> Thanks, Eric
> 


-- 
John Dunlap                           University of Washington
Senior Electrical Engineer            Applied Physics Laboratory
dunlap@apl.washington.edu             1013 NE 40th Street
206-543-7207, 543-1300, FAX 543-6785  Seattle, WA   98105-6698