Pb with 3C905B - TX -Reply

JILL SMITH SMITH.JILL@epamail.epa.gov
Fri Oct 30 13:19:09 1998


Also, make sure NIC is set to Autoselect the network!

Jill K. Smith
Lockheed Martin
919-541-5323

>>> Franck LAIGLE <Franck.LAIGLE@esstin.u-nancy.fr> 10/30/98 06:05am >>>
Hi all,

I have a problem with my computer (Pentium II 300 - 3C905B 'Cyclone'
EtherCard - RedHat 5.1 2.0.35). I installed the driver 3c59x ver. 0.99G in
my kernel, but i can't emit/receive on my LAN.
I give you some copy/paste :

ifconfig :
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
          RX packets:2232 errors:0 dropped:0 overruns:0
          TX packets:2232 errors:0 dropped:0 overruns:0

eth0      Link encap:Ethernet  HWaddr 00:10:5A:41:F1:2B
          inet addr:193.54.10.241  Bcast:193.54.10.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
          TX packets:1589 errors:0 dropped:0 overruns:0
          Interrupt:10 Base address:0xb000        

route -n :
Kernel IP routing table
Destination  Gateway        Genmask        Flags Metric Ref    Use Iface
193.54.10.0  0.0.0.0        255.255.255.0  U     0      0       15 eth0
127.0.0.0    0.0.0.0        255.0.0.0      U     0      0        4 lo
0.0.0.0      193.54.10.254  0.0.0.0        UG    0      0        4 eth0  

dmesg :
3c59x.c:v0.99G 9/25/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0xb000,  00:10:5a:41:f1:2b, IRQ 10
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 786d.
  MII transceiver found at address 0, status 786d.
  Enabling bus-master transmits and whole-frame receives.       

Some pings from my computer :

[franck@jupiter1 ~]# ping 193.54.10.0
PING 193.54.10.0 (193.54.10.0): 56 data bytes

--- 193.54.10.0 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss

----------------------------------------------------------------------

[franck@jupiter1 ~]# ping 193.54.10.255
PING 193.54.10.255 (193.54.10.255): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.2 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.1 ms 

--- 193.54.10.255 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss         
round-trip min/avg/max = 0.1/0.1/0.2 ms

------------------------------------------------------------------

When i ping my machine from another machine on the LAN, i have no
response. 


I don't know what's the problem. Can someone help me ?

	Franck



e-m. : laiglefr@esstin.u-nancy.fr
ICQ : #15585250