Problem with Lite-on based card

[Steve Bergman]

Hi,

I am having a problem with a Lite-on based card.  When we switched hubs
from 10baseT to 100baseT I started seeing a very small percentage of
transmit and receive errors. (Also carrier and frame.  Could someone
please explain what the errors: dropped: carrier: overruns: and frame:
actually mean?   I have not been able to find a good explanation.)  This
would not be so bad, but the card periodically stops talking to the
network and has to be reset.  We have replaced the cable and changed
ports and I think it is just a bad card.  I have two identical cards on
two other machines talking at 100mbit over a hub.  One card gets a few
transmit and receive errors and the other gets none.  These are linksys
etherfast pci cards.  All machines are using driver 0.89H except that
I upgraded the one getting errors to 0.91(something, f, I think) to no
avail.  I am going to take the one that is not getting errors and try it
in the (original) production machine.

Here's another question.  If you were going to standardize on a 100mb
card, and wanted good reliability without too excessive a price, what
would be the best bet.  I'm partial to tulip and tulip clones but would
consider others.  Are DEC/Compaq  cards or cards with real tulip chips
any more reliable than the Linksys cards that I am using?

Steve Bergman