[vortex-bug] vortex problem

[Bogdan Costescu]

On Wed, 29 Aug 2001, Diogo Saad wrote:

> I can't find why the link partner is 100baseTx-HD ( not FD)......
> Can it be a 1600 cisco router??? how do I set hte router to FD???

I'm not familiar with this series, but if the switched is managed (you can
access it through a serial link/SLIP, telnet or www through normal
network), you should be able to do it. In this case, read the manuals.
Although it's not recommended, you might also force the router port to
100-FD, but then you have to force the card to 100-FD as well.

>   link partner: 100baseTx-HD 10baseT-HD
>  Your link partner advertised 40a1: 100baseTx 10baseT.

So this is preaty clear. What I don't understand is why you still get the
errors if the autonegotiation succeded.

Sincerely,

Bogdan Costescu

IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: Bogdan.Costescu@IWR.Uni-Heidelberg.De