[vortex] 3c905b problem
John Croson
pcnorb@goibsmail.com
Sat, 2 Dec 2000 13:07:26 -0600
This is a multi-part message in MIME format.
------=_NextPart_000_001D_01C05C60.D197B490
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi. I am running RH7, previously running RH6.2. The card worked fine for =
me with that version, but now doesn't seem to want to work. It does work =
in Win2k, and 98 in both 10 and 100mb.
The end of dmesg reports:
3c59x.c:v0.99H 01Aug00 Donald Becker =
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd400, 00:60:08:33:46:09, =
IRQ 5
8K word-wide RAM 3:5 Rx:Tx split, 10baseT interface.
Enabling bus-master transmits and whole-frame receives.
vortex-diag -a shows:
Index #1: Found a 3c900 Boomerang 10Mbps Combo adapter at 0xd400.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 7, registers values by window:
Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
Window 1: FIFO FIFO 0000 2000 8000 00ff 13fc 2000.
Window 2: 6000 3308 0946 0000 0000 0000 06c6 4000.
Window 3: 02d8 0033 0000 0020 e138 0bff 13ff 6000.
Window 4: 0000 00ce 0000 0cc0 0000 4810 0000 8000.
Window 5: 1ffc fffc 06c6 0600 0007 06ce 06c6 a000.
Window 6: 0000 0000 0000 0000 0000 0000 0e2e c000.
Window 7: 52c8 0740 0000 0000 8000 00ff 100c e000.
Vortex chip registers at 0xd400
0xD410: **FIFO** 00000000 00008000 *STATUS*
0xD420: 00000021 00000000 0641fc02 060000bb
0xD430: 00000000 0000da3f 07405000 00000000
Indication enable is 06c6, interrupt enable is 06ce.
No interrupt sources are pending.
Transceiver/media interfaces available: 10baseT 10base2 AUI.
Transceiver type in use: 10base2.
MAC settings: full-duplex.
Maximum packet size is 0.
Station address set to 00:60:08:33:46:09.
Configuration options 06c6.
vortex-diag -e shows:
Vortex chip registers at 0xd400
0xD410: **FIFO** 00000000 00008000 *STATUS*
0xD420: 00000021 00000000 0641fc02 060000bb
0xD430: 00000000 0000da3f 07405000 00000000
Indication enable is 06c6, interrupt enable is 06ce.
No interrupt sources are pending.
Transceiver/media interfaces available: 10baseT 10base2 AUI.
Transceiver type in use: 10base2.
MAC settings: full-duplex.
Maximum packet size is 0.
Station address set to 00:60:08:33:46:09.
Configuration options 06c6.
[root@redhat bin]# vortex-diag -e
vortex-diag.c:v2.03 9/26/2000 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a 3c900 Boomerang 10Mbps Combo adapter at 0xd400.
Parsing the EEPROM of a 3Com Vortex/Boomerang:
3Com Node Address 00:60:08:33:46:09 (used as a unique ID only).
OEM Station address 00:60:08:33:46:09 (used as the ethernet address).
Manufacture date (MM/DD/YYYY) 7/17/1997, division 6, product KL.
Options: force full-duplex.
Vortex format checksum is correct (00a3 vs. 00a3).
Cyclone format checksum is incorrect (00 vs. 0xff).
Hurricane format checksum is incorrect (00 vs. 0xff).
------=_NextPart_000_001D_01C05C60.D197B490
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.3019.2500" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi. I am running RH7, previously =
running RH6.2. The=20
card worked fine for me with that version, but now doesn't seem to want =
to work.=20
It does work in Win2k, and 98 in both 10 and 100mb.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>The end of dmesg reports:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>3c59x.c:v0.99H 01Aug00 Donald Becker <A =
href=3D"http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html">http://ces=
dis.gsfc.nasa.gov/linux/drivers/vortex.html</A><BR>eth0:=20
3Com 3c900 Boomerang 10Mbps Combo at 0xd400, 00:60:08:33:46:09, =
IRQ=20
5<BR> 8K word-wide RAM 3:5 Rx:Tx split, 10baseT =
interface.<BR> =20
Enabling bus-master transmits and whole-frame receives.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>vortex-diag -a shows:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Index #1: Found a 3c900 Boomerang =
10Mbps Combo=20
adapter at 0xd400.<BR>The Vortex chip may be active, so FIFO registers =
will not=20
be read.<BR>To see all register values use the '-f' flag.<BR>Initial =
window 7,=20
registers values by window:<BR> Window 0: 0000 0000 0000 0000 0000 =
00bf=20
ffff 0000.<BR> Window 1: FIFO FIFO 0000 2000 8000 00ff 13fc=20
2000.<BR> Window 2: 6000 3308 0946 0000 0000 0000 06c6 =
4000.<BR> =20
Window 3: 02d8 0033 0000 0020 e138 0bff 13ff 6000.<BR> Window 4: =
0000 00ce=20
0000 0cc0 0000 4810 0000 8000.<BR> Window 5: 1ffc fffc 06c6 0600 =
0007 06ce=20
06c6 a000.<BR> Window 6: 0000 0000 0000 0000 0000 0000 0e2e=20
c000.<BR> Window 7: 52c8 0740 0000 0000 8000 00ff 100c =
e000.<BR>Vortex=20
chip registers at 0xd400<BR> 0xD410: **FIFO** 00000000 00008000=20
*STATUS*<BR> 0xD420: 00000021 00000000 0641fc02 060000bb<BR> =
0xD430:=20
00000000 0000da3f 07405000 00000000<BR> Indication enable is 06c6,=20
interrupt enable is 06ce.<BR> No interrupt sources are=20
pending.<BR> Transceiver/media interfaces available: 10baseT =
10base2=20
AUI.<BR>Transceiver type in use: 10base2.<BR> MAC settings:=20
full-duplex.<BR>Maximum packet size is 0.<BR> Station address set =
to=20
00:60:08:33:46:09.<BR> Configuration options 06c6.</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>vortex-diag -e shows:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Vortex chip registers at =
0xd400<BR> 0xD410:=20
**FIFO** 00000000 00008000 *STATUS*<BR> 0xD420: 00000021 00000000 =
0641fc02=20
060000bb<BR> 0xD430: 00000000 0000da3f 07405000=20
00000000<BR> Indication enable is 06c6, interrupt enable is=20
06ce.<BR> No interrupt sources are =
pending.<BR> Transceiver/media=20
interfaces available: 10baseT 10base2 AUI.<BR>Transceiver type in=20
use: 10base2.<BR> MAC settings: full-duplex.<BR>Maximum =
packet size=20
is 0.<BR> Station address set to =
00:60:08:33:46:09.<BR> Configuration=20
options 06c6.<BR>[root@redhat bin]# vortex-diag =
-e<BR>vortex-diag.c:v2.03=20
9/26/2000 Donald Becker (<A=20
href=3D"mailto:becker@scyld.com">becker@scyld.com</A>)<BR> <A=20
href=3D"http://www.scyld.com/diag/index.html">http://www.scyld.com/diag/i=
ndex.html</A><BR>Index=20
#1: Found a 3c900 Boomerang 10Mbps Combo adapter at 0xd400.<BR>Parsing =
the=20
EEPROM of a 3Com Vortex/Boomerang:<BR> 3Com Node Address =
00:60:08:33:46:09=20
(used as a unique ID only).<BR> OEM Station address =
00:60:08:33:46:09 (used=20
as the ethernet address).<BR> Manufacture date (MM/DD/YYYY) =
7/17/1997,=20
division 6, product KL.<BR>Options: force full-duplex.<BR> Vortex =
format=20
checksum is correct (00a3 vs. 00a3).<BR> Cyclone format checksum =
is=20
incorrect (00 vs. 0xff).<BR> Hurricane format checksum is =
incorrect (00=20
vs. 0xff).<BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2> </DIV></FONT></BODY></HTML>
------=_NextPart_000_001D_01C05C60.D197B490--