[vortex] Wont wake up after suspend with 2.4.7 (vortex_suspend?)

[Andrew Morton]

Martin Vonwald wrote:
> 
> Hi all!
> 
> I have _one_ machine with two setups:
> * the old setup is running kernel 2.2.14 (Suse 6.3)
> * the new setup is running kernel 2.4.7 (Suse 7.2)
> 
> This machine runs pretty all the time and suspends itself via "apm -s" if
> no other machine is connected (smb+nfs). When some other machine accesses
> the network it should wake up on its own - and it does exactly that running
> 2.2.14 and it completely fails running 2.4.7 (both using the driver 3c90x
> from the kernel of the distro)
> 
> When the the machine (2.4.7) goes into suspend and after that resumes
> (manually!) I see the following messages in /var/log/messages:
> ---------
> Oct 30 07:56:12 Heraklith apmd[564]: Version 3.0final (APM BIOS 1.2, Linux
> driver 1.14)
> Oct 30 07:56:13 Heraklith apmd[564]: Charge: * * * (-1% unknown)
> Oct 30 07:56:14 Heraklith kernel: vortex_suspend(eth0)
> Oct 30 07:56:15 Heraklith apmd[564]: User Suspend
> Oct 30 07:56:27 Heraklith kernel: vortex_resume(eth0)
> Oct 30 07:56:27 Heraklith kernel: eth0: using NWAY device table, not 8
> Oct 30 07:56:28 Heraklith apmd[564]: Normal Resume after 00:00:13 (-1%
> unknown) AC power
> ---------
> 

Please add

	options 3c59x enable_wol=1

to /etc/modules.conf.  Despite the name, this option enables the
use of the new power management APIs in the kernel.  It'll save
and restore the device's power state and may well fix the problem.