[vortex] Kernel Output

[Josh Durbin]

Vortex Mailing List,

Before, I had the driver for the 3com vortex, yada yda...series card 
compiled into the kernel.  I recompiled and used it as a module and 
loaded the module with the following settings: "modprobe 3c59x debug=7 ; 
ifup eth0" ... the portion after the semicolon didn't work but I'm 
almost positive that doesn't matter?!?!? Anyway... here is the output 
from the kernel:

PCI: Found IRQ 11 for device 02:06.0
PCI: Sharing IRQ 11 with 00:1f.2
PCI: Sharing IRQ 11 with 02:06.1
PCI: Sharing IRQ 11 with 02:0f.0
PCI: Sharing IRQ 11 with 02:0f.1
PCI: Sharing IRQ 11 with 02:0f.2
3c59x: Donald Becker and others.  www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:06.0: 3Com PCI 3c556B Laptop Hurricane at 0xe800. Vers LK1.1.16
00:04:76:5e:fd:74, IRQ 11
 product code 0000 rev aa.8 date 03-01-00
02:06.0: CardBus functions mapped f8ffd800->e597f800
 Internal config register is 80600040, transceivers 0x40.
 8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
 MII transceiver found at address 0, status 7849.
 Enabling bus-master transmits and whole-frame receives.
02:06.0: scatter/gather enabled. h/w checksums enabled

Thanks for your help,

         Josh Durbin