[vortex] Problem with 3com 10/100 Mini PCI adapter Revisited

[Cameron Johnston]

I see that Mr. Durbin is having a similar problem and the output of
dmesg with debug set to level 7 has been requested. Here's mine:

PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.16
 00:04:76:5e:ff:3e, IRQ 11
  product code 0000 rev aa.8 date 03-01-00
00:03.0: CardBus functions mapped e8101000->e08fc000
  Internal config register is 80600040, transceivers 0x40.
  8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
  MII transceiver found at address 0, status 7849.
  Enabling bus-master transmits and whole-frame receives.
00:03.0: scatter/gather enabled. h/w checksums enabled

I tried to compile a module with the version currently on scyld.com
(testing and release) but ran into problems, namely pci-scan.c not
compiling.

Anything else I should dig up?

- Cameron

On Wed, 2002-02-27 at 12:58, Cameron Johnston wrote:
> Any ideas, or tools I may have over looked? I have a friend who works at
> 3Com who is trying to help me find anything that might get this to work
> properly but he recomeneded I post to this list as well.