[eepro100] Need Serious Help w/ eepro100 Driver/card

[Alvin Oga]

hi ya infinity...

to to the intelwebsite or look at my stuff...
- depending on the kernel...you might need topatch the eepro100.c file

	http://www.linux-1U.net/MotherBoard
	- look at the eepro* stuff

you will probably need X11 help too???

but.. d816eeaal w/ rh6.2 works fine...just need to tweek it

have fun
alvin

On Wed, 27 Dec 2000, Infinity2 wrote:

> I have just built a new Hosting server.  It has an Intel D815EAL mobo with
> Integrated LAN.  No matter what I do, I cannot get it to load the drivers
> for the eepro100 at startup.  It always says "Delaying eth0 Initialization".
> This is RH V6.2.  If I go into /lib/modules/2.2.14-5.0/net and run:
> 
> linux4# insmod pci-scan.o and
> linux4# insmod eepro100.o
> 
> it will load the modules
> then if I try to ifup eth0 it works "sometimes"
> and sometimes it just freezes.
> 
> I checked the module.dep and it lists pci-scan.o as a dependency of the
> eepro100.o.
> 
> What am I missing?  Where do I start.  I have tried everything I can find on
> the subject.
> 
> BTW.  The eepro100 and pci-scan were versions downloaded from www.scyld.com
> and compiled on the server.  Help?
> 
> Thanks in advance,
> 
> Rob Spurlock
> Lock-Net Internet Services
> 1.800.216.8006
> Get Locked On! With Lock-Net!
> 
> 
> _______________________________________________
> eepro100 mailing list
> eepro100@scyld.com
> http://www.scyld.com/mailman/listinfo/eepro100
>