Correct output of a working 21143-TD CardBus card (e.g. Linksys)

[Donald Becker]

First, ignore the reply address.  I'm posting this from my laptop.

Here is the current output, right this very minute, of the Linksys 21143 I'm
using to post this message.  Needless to say, "it works for me".


[root@glup personal]# /usr/src/diag/tulip-diag -p 0x280 -a -f -m
tulip-diag.c:v1.06B 1/27/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Unknown PCI device ID 0.
Digital Tulip, unknown type Tulip chip registers at 0x280:
  fa008000 ffffffff ffffffff 00493820 00493a20 f0660000 b20e6202 fbfffbff
  e0000000 fffd83ff ffffffff 00000000 000000c6 ffff0000 fff80000 8ff10008
 The Rx process state is 'Waiting for packets'.
 The Tx process state is 'Idle'.
Transmit started, Receive started, full-duplex.
 The transmit threshold is 256.
 Port selection is MII, full-duplex.
 MII PHY found at address 0, status 0x782d.
 MII PHY #0 transceiver registers:
   3000 782d 0040 6212 01e1 41e1 0003 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   1000 0301 0000 0000 0000 0161 0100 0000
   003f f53e 0f00 ff00 002f 0000 80a0 000b.

What typically happens is that I write an announcement link this, and the
bug that didn't show up in weeks of testing happens just as I send it.  If
you get this message, that DIDN'T happen.

			   Donald Becker, frustrated hacker.