tulip.c on AXP MIATA w Kernel 2.2
christophe.level@digital.com@snails.enet.dec.com
christophe.level@digital.com@snails.enet.dec.com
Sun Jan 31 05:41:14 1999
Hi,
I have a problem setting kernel 2.2 on a RH5.2 system (kernel
2.0.35).
The ethernet build'in board (21143) cannot communicate with my
100Mbts switch, as it used to with kernel 2.0.35.
I don't know if it's a bugg or whatever.
Following is the output of the initalisation sequence from the
kernel:
**************************************************************
Jan 28 15:46:43 bar kernel: tulip.c:v0.89H 5/23/98
becker@cesdis.gsfc.nasa.gov
Jan 28 15:46:43 bar kernel: eth0: Digital DS21142/3 Tulip at 0x8000, 00
00 f8 76
2b 7d, IRQ 24.
Jan 28 15:46:43 bar kernel: eth0: EEPROM default media type Autosense.
Jan 28 15:46:43 bar kernel: eth0: Index #0 - Media 10baseT (#0)
described by a
21142 Serial PHY (2) block.
Jan 28 15:46:43 bar kernel: eth0: Index #1 - Media 10baseT-FD (#4)
described by
a 21142 Serial PHY (2) block.
Jan 28 15:46:43 bar kernel: eth0: Index #2 - Media 10base2 (#1)
described by a
21142 Serial PHY (2) block.
Jan 28 15:46:43 bar kernel: eth0: Index #3 - Media AUI (#2) described
by a 2114
2 Serial PHY (2) block.
Jan 28 15:46:43 bar kernel: eth0: Index #4 - Media MII (#11) described
by a 211
42 MII PHY (3) block.
Jan 28 15:46:43 bar kernel: eth0: MII transceiver found at MDIO address
5, conf
ig 0000 status 784b.
Jan 28 15:46:43 bar kernel: eth1: region already allocated at 0x8000.
***************************************************************
Hope it's not too tricky !
Any idea would help,
Thanks;
Christophe.
================== RFC 822 Headers ==================
Received: by snails.evt.DEC.COM (5.57/Ultrix-lsh)
id AA06410 at Sun, 31 Jan 99 11:35:42 +0100
Received: from aeo-ras-240-236.pc.aeo.dec.com by asterix.aeo.dec.com (5.65v4.0/1.1.19.2/20May98-0532PM)
id AA17846; Sun, 31 Jan 1999 12:44:49 +0100
Message-Id: <36B43224.FC5BD199@digital.com>
Date: Sun Jan 31 05:41:14 1999
X-Mailer: Mozilla 4.5 [en] (WinNT; I)
X-Accept-Language: en
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit