Problem with 0.91g-ppc driver in 2.2.14

[Jeremy Sanders]

Some additional information. tulip-diag reports:

[root@corona jss]# ./a.out  -f -ee -a -mm
tulip-diag.c:v1.19 10/2/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DC21041 Tulip adapter at 0x6000.
Digital DC21041 Tulip chip registers at 0x6000:
  ffe04800 ffffffff ffffffff 00273810 00273a10 fc660000 fffe2002 ffffebef
  fffe0000 ffff4bf8 ffffffff fffe0000 000001c8 ffffef05 ffffff3f ffff0008
 Port selection is half-duplex.
 Transmit started, Receive started, half-duplex.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Loading Tx FIFO'.
  The transmit unit is set to store-and-forward.
  The NWay status register is 000001c8.
EEPROM size is 6.
PCI Subsystem IDs, vendor 0000, device 0000.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:00:C0:B2:A2:DE.
EEPROM transceiver/media description for the Digital DC21041 Tulip chip.
Leaf node at offset 30, default media type 0800 (Autosense).
 2 transceiver description blocks:
  21041 media index 00 (10baseT).
  21041 media index 04 (10baseT-Full Duplex).
EEPROM contents:
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0101 0000 b2c0 dea2 1e00 0000 0800
  0002 0004 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0306
 ID block CRC 0xe3 (vs. 00).
  Full contents CRC 0x0306 (read as 0x0306).
   No MII transceivers found!
  Internal autonegotiation state is 'Autonegotiation disabled'.


-------

The processor is a Cyrix 150+, if that's any use.

Jeremy.

-- 
Jeremy Sanders  jss@ast.cam.ac.uk     Pembroke College, Cambridge. CB2 1RF
(01223) 337511  Institute of Astronomy, Madingley Road, Cambridge. CB3 0HA
- I could have gone for charm or beauty, but instead I went for strange  -
-------------------------------------- http://www-xray.ast.cam.ac.uk/~jss/

-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-tulip-bug-request@beowulf.org