Alpha multia nic problems

[John Keimel]

--BMVVzbSWLtt+g7M9
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Have a alpha Multia, running on an install of RH 5.1. Trying to rebuild
the kernel so that it supports the supposed 'tulip' on board chip inside
it, causes the machine to register dump while attempting to laod the
eth0 driver. We've tried this with the .89, .83 and .79 revisions of the
tulip driver.=20

Does anyone have any suggestions as to how to fix this?=20

BTW, we have another 'identical' machine, which runs fine on the .79
driver. The only real difference is that the other machine is running
2.0.32, while this one is using 2.0.34 source.

Hope this is anough info for someone to go on. If not, let me know.
Thanks!=20
--=20

                              John Keimel
                         Office:  1-800-681-MINT
                      The Maine InternetWorks, Inc. =20

--BMVVzbSWLtt+g7M9
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNatxa52A+4Rqk86dAQFoeQP/Zni3igaiFA2EuN84BESfT8jFaPHCScvh
6qtRxTSb6Un7LvfT3wwrNf7dqdnIX4RyaPIiq93tRyyGMIXsZNIYZ3WcajB7noWB
CCBpJcyiYT+buPnApM5IZP+n27uV3mVy/E0eDc8OAHj3emCLnZu2wf16/lLZ05sa
l7MbbqjrMg4=
=NbnO
-----END PGP SIGNATURE-----

--BMVVzbSWLtt+g7M9--